Adhesive Cleaning Card Routine - HID FARGO HDP 6600 Maintenance Manual

Powering
Trusted Identities

2.1 Adhesive cleaning card routine

Video link: https://player.vimeo.com/video/679257775
The following diagram shows the location where the cleaning card is inserted into the printer.
1. Open the front door and remove the film material from the printer.
2. Slide the film drawer in and close the front door.
3. Prepare the cleaning card by removing the adhesive backing paper.
4. Navigate through the onscreen menu to the Toolbox and select Clean Printer.
5. Manually feed the cleaning card into the feed rollers and into the printer.
The printer cleans itself and ejects the card into the output hopper.
6. Place the input hopper back in place.
7. Open the front door and re-install the film material.
8. Close the door.
PLT-06394, A.0 7
HID® FARGO® HDP®6600
Recommended Maintenance
February 2022