K Panel Resin; 4.13.1 Print All Black With K Panel; 4.13.2 Print Ymc Under K - HID Fargo DTC1250 User Manual

DTC1250e/DTC1000Me/DTC4250e Card Printer User Guide, PLT-01668, 1.0
4.13

K Panel Resin

Use this tab to control where the resin black (K) Panel of a full-color ribbon is printed. If a ribbon without a K
resin panel is installed in your printer, these options are grayed out and unavailable.
The orientation of the card display area is determined by the orientation specified in your template.
Refer to Defining an Overlay or Print Area for information that relates to this tab.
The K Panel Resin tab includes the Print All Black with K Panel area and options to Print YMC under K
or Print K Only.

4.13.1 Print All Black with K Panel

This area includes three options:
• Full Card – Select this option to overlay and/or print the entire card.
• Defined Area(s) – Select this option to overlay and/or print only in the selected and define area(s).
• Undefined Area(s) – Select this option to overlay and/or print in the space outside the selected and
defined area.

4.13.2 Print YMC under K

Select Print YMC under K to print all black in the designated areas with the yellow (Y), magenta (M) and
cyan (C) ribbon panels directly beneath the resin black (K) panel. Theis combination provides a gradual
transition between the resin black text or bar code.
Page 62
© 2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
October 2013