K Panel Resin Tab - HID FARGO DTC1500XE User Manual

4.8 K Panel Resin Tab

Use the K Panel Resin tab to control where the resin black (K) panel of a full-color ribbon is printed. If
a ribbon without a K resin panel is installed in your printer, these options are grayed out and
unavailable.
Note: Orientation of the card display area is determined by the orientation specified in the template.
See Section 4.7.1: Defining an Overlay or Print Area for information.
Field
Print All Black with K Panel
Full Card
Defined Area(s)
Undefined Area(s)
Print YMC under K
60
Printer Preferences
Description
Select this option to print the resin black (K) panel for all black found within all areas
of the image.
Select this option to use resin black (K) panel for all black found only in the selected
and defined area(s).
See Section 4.8.1: Defined Area.
Select this option to omit resin black (K) panel in the selected undefined area(s).
Select this option to print all black in the designated areas with the yellow (Y),
magenta (M) and cyan (C) ribbon panels directly beneath the resin black (K) panel.
This combination provides a gradual transition between the resin black text or bar
code.
PLT-03159, Rev A.0
September 2017