Table 30: Wbm Page, "Diagnostics" - "System Log" - "Log" Tab; Table 31: Log Event Description - WAGO 852-1322 Manual

64 Configuration in the WBM
Table 30: WBM Page, "Diagnostics" – "System Log" – "Log" Tab
Parameters
Read all
notifications
Read only the
last n
Automatic
refresh cycle
(sec)

Table 31: Log Event Description

Parameters
Index
Date
Time
Startup Time
Event
Manual
1.0.01
852-1322/852-1328 Industrial Managed Switch
Factory Default Description
Selected Activate the display of all log messages.
20 Activate the display of only the last n messages. The user can
also specify the number of messages to be displayed.
Disable, 20 Select the check box to enable cyclic refresh. Enter the cycle
time in seconds in which a cyclic refresh is performed. The
label of the button ("Refresh"/"Start"/"Stop") changes
depending on the selected mode.
Description
Indicate the index of a particular log event
Indicate the system date of the occurred log event
Indicate the time stamp that this log event occurred
Indicate how long the system (industrial managed switch) has been up since this
log event occurred
Details description of this log event