Table of Contents
Advertisement
852-1328
9. Select your desired page on the navigation bar at the top of the screen and clicking
on corresponding tab on the left hand side of the screen.
10. Make the desired settings on the desired web page.
11. Click [Submit] or [Change] or [Add] to confirm or update your changes to apply the
settings.
12. It is highly recommended to avoid using the factory default password during the ac-
tual operation of your device. Therefore, if you logged in with the default password
successfully, the device will remind the user to change the password with a warning
pop-up dialog and redirect the user to the change password page as shown in Fig-
ure "Default Password Warning Pop-up Dialog on Password Web Page". Please
click the [OK] button to accept the warning.
You can access the corresponding WBM pages via the links in the navigation bar.
Navigation Links and WBM Pages
[Information]
•
System Information
•
Legal Information
[Configuration]
•
System Settings
•
Device Discovery - LLDP
•
System Management - SNTP
•
Network Settings
•
Port Settings
•
Interface - Mirror
•
Password
Product manual | Version: 1.2.0
Industrial Managed Switch
Figure 14: Default Password Warning Pop-up Dialog on Password Web Page
Table 13: Overview – Navigation Links and WBM Pages
Configuration in the WBM
Figure 13: Start Page of WBM
31
Advertisement
Chapters
Table of Contents
