Table of Contents
Advertisement
Configuration in the WBM
Parameters
802.1x
Radius Server IP
Server Port
Accounting Port
NAS Identifier
Shared Key
Confirmed Shared
Key
10.6.3.2 Parameters Setting (IEEE 802.1X - Parameter Setting)
A setting tab page of the 802.1X parameters is shown in Figure "WBM "Security" Page –
"802.1X" – "802.1X Parameter Setting" Tab". These parameters are related to the authen-
tication periods, the timeout durations, and the maximum number of authentication re-
quests. Table "WBM "Security" Page – "802.1X" – "802.1X Parameter Setting" Tab" sum-
marizes the descriptions of these parameters and their default settings. To keep the
change of any input parameters, a user should click on the [Update] button afterwards.
64
Product manual | Version: 1.2.0
Industrial Managed Switch
Figure 49: WBM "Security" Page – "802.1X" – "Setting" Tab
Factory Default
Description
Disabled
Choose to Enable/Disable 802.1X for all ports.
0.0.0.0
Set an IP address of the RADIUS server.
1812
Set the port number of the RADIUS server. The range is from 0 to
65535.
1813
Set the accounting port number of the RADIUS server. The range
is from 0 to 65535.
Managed-Switch
Specify the identifier string for the 802.1X Network Access Server
(NAS). The maximum length is 30 characters.
NULL
A shared key between the managed switch and the RADIUS
Server. Both devices must be configured to use the same key
where the maximum length is 30 characters.
Dependent
Re-type the shared key string.
Table 34: WBM "Security" Page – "802.1X" – "Setting" Tab
852-1328
Advertisement
Chapters
Table of Contents
