Follow the steps below when the text entry screen is displayed.
Press [MENU/SET] several times until the
desired character is displayed
]: Enter a blank.
To change the character type
• Press [DISP.] button
To continue entering characters
• Move the zoom lever toward T side
• Rotate the rear dial counterclockwise.
To edit text
the text to edit
• You can also use the zoom lever or rear dial to reposition the cursor.
When you are finished entering text, use
[Set] and press [MENU/SET]
A maximum of 30 characters can be entered (maximum of 9 characters when setting names in
A maximum of 15 characters can be entered for [
6 characters when setting names in [Face Recog.]).
to select characters
to select [
] and press [MENU/SET]
to select [ ] and press [MENU/SET]
to select [ ] [ ] and press [MENU/SET]. Then, move the cursor to
to select [Delete] and press [MENU/SET]
to select the correct text, and press [MENU/SET]
], [ ], [ ], [ ] and [
] (maximum of