Download  Print this page

Displaying Still Pictures On A Tv; In Combination With Other Devices Playing Back Pictures On A Tv - Panasonic LUMIX DC-TZ200 Operating Instructions Manual

Hide thumbs

Advertisement

Displaying still pictures on a TV

You can display still pictures on a TV that is compatible with a DLNA (DMR) function.
[Setup] → [Wi-Fi] → [Wi-Fi Function] → [New Connection]
→ [Playback on TV]
1
Select [Via Network] or [Direct] to connect
2
Select the device you wish to connect to
• When the connection is established, the screen is displayed.
3
Take or play back still pictures on this unit
• To terminate the connection, follow the steps below:
(You can also close the connection by pressing the [Wi-Fi] button.)
When you display the pictures on a TV using the Wi-Fi function, they are not output using 4K
resolution. To output pictures using 4K resolution, connect this unit to the TV using an HDMI micro
cable.
(→270)
When a TV is connected to this unit, the TV screen may temporarily return to the status before the
connection. Pictures are displayed again when you take or play back pictures.
Even if [Effect] and [Sound] are set on this unit, these settings are disabled when the pictures are
played back on a TV during Slide Show playback.
Motion pictures and 4K burst files cannot be played back.
The pictures displayed on "Multi Playback" screen or some screens of the camera are not
displayed on the TV.
When [Auto Transfer] in the [Bluetooth] is set to [ON], [Wi-Fi Function] is disabled.
245
[Setup] → [Wi-Fi] → [Wi-Fi Function] → [Yes]
(→261, 264)
Wi-Fi/Bluetooth

Advertisement

Table of Contents

This manual is also suitable for:

Lumix dc-tz202Lumix dc-zs200

Comments to this Manuals

Symbols: 0
Latest comments: