You can use the camera to develop still pictures that were recorded in RAW format. The
created still pictures are saved in JPEG format.
[Playback] → [RAW Processing]
to select RAW file and press [MENU/SET]
to select the item and then press
[MENU/SET] to set
• The following items can be set. The settings used during
recording are applied at the time of setting.
You can select White Balance to make adjustments. When you select an
item with [
], you can develop the pictures using the same settings that
were applied for recording.
You can correct brightness in the range from –2 EV to +2 EV.
You can select the [Photo Style] effects.
You can select the [i.Dynamic] settings.
You can adjust the contrast.
You can adjust the brightness of a highlighted area.
You can adjust the brightness of a shadowed area.
You can adjust the saturation. (You can adjust the colouring when
[Monochrome] or [L.Monochrome] is selected for [Photo Style].)
You can select a Filter effect. (Only when [Monochrome] or
[L.Monochrome] is selected for [Photo Style].)
You can set noise reduction.
You can select the [i.Resolution] settings.
You can adjust the impression of resolution.
to select items and press [MENU/SET] to perform the following
[Reinstate Adjustments]: You can restore the settings to the ones used
[Color Space]: You can select [Color Space] from either [sRGB] or
[Picture Size]: You can select the picture size ([L], [M], or [S]) of a JPEG
file when saving pictures.
Using Menu Functions