Entering Text - Panasonic LUMIX DC-ZS200D Owner's Manual For Advanced Features

Entering Text

Follow the steps below when the text entry screen is displayed.
1
Use
2
Press [MENU/SET] several times until the
desired character is displayed
• [ ]: Enter a blank.
■
To change the character type
• Press [DISP.] button
• Use
■
To continue entering characters
• Use
• Move the zoom lever toward T side
• Rotate the rear dial counterclockwise.
■
To edit text
Use
the text to edit
• You can also use the zoom lever or rear dial to reposition the cursor.
Use
Use
3
When you are finished entering text, use
[Set] and press [MENU/SET]
●
A maximum of 30 characters can be entered (maximum of 9 characters when setting names in
[Face Recog.]).
●
A maximum of 15 characters can be entered for [
6 characters when setting names in [Face Recog.]).
51
to select characters
to select [ ] and press [MENU/SET]
to select [ ] and press [MENU/SET]
to select [ ] [ ] and press [MENU/SET]. Then, move the cursor to
to select [Delete] and press [MENU/SET]
to select the correct text, and press [MENU/SET]
], [ ], [ ], [ ] and [
Basics
to select
] (maximum of