Download  Print this page

Video Divide; Time Lapse Video - Panasonic LUMIX DC-TZ200 Operating Instructions Manual

Hide thumbs

Advertisement

[Video Divide]

A single motion picture can be split into 2 parts. This is convenient when you want to keep
just the necessary scenes, or if you wish to delete unnecessary scenes to increase free
space on your card, such as when travelling.
[Playback] → [Video Divide]
1
Use
to select a motion picture to split and press [MENU/SET]
2
Press
at where you want to split a motion picture to
pause it
• If you press
to the splitting positions in a motion picture.
3
Press
• The original motion picture that was split does not remain.
(There will only be the 2 motion pictures that were created after
the split.)
During dividing, do not turn off the camera or remove the card or battery. If you do so, the motion
picture may be deleted.
Motion pictures cannot be divided at a location close to the start or end of the motion picture.
This function is not available in the following case:
• Motion pictures with a short recording time

[Time Lapse Video]

You can create a motion picture from the pictures in a group that was recorded using
[Time Lapse Shot].
[Playback] → [Time Lapse Video]
1
Use
to select the [Time Lapse Shot] picture group and press
[MENU/SET]
2
Create a motion picture after selecting a production method
• For details, refer to step
220
while paused, you can make finer adjustments
5
and the subsequent steps (→131).
Using Menu Functions
Menu list

Advertisement

Table of Contents

This manual is also suitable for:

Lumix dc-tz202Lumix dc-zs200

Comments to this Manuals

Symbols: 0
Latest comments: