Iso Increments; Extended Iso - Panasonic LUMIX DC-TZ200 Operating Instructions Manual

[ISO Increments]

You can change the setting to increase ISO sensitivity by 1 EV or 1/3 EV.

[Extended ISO]

You can extend the numeric values that can be set for ISO Sensitivity.
[Exposure Comp. Reset]
If the recording mode is changed or the camera is turned off, the exposure compensation
value setting is reset.
[AF/AE Lock Hold]
Focus and exposure stays locked even if you press and release the [AF/AE LOCK] button
(or the function button where [AF/AE LOCK] is registered). Press the button again to
cancel the lock.
[Shutter AF]
Set whether or not the focus is adjusted automatically when the shutter button is pressed
halfway.
[Half Press Release]
The shutter will immediately fire when the shutter button is pressed halfway.
[Quick AF]
The focus is automatically adjusted when camera blurring is small even when the shutter
button is not pressed. (Increases battery consumption.)
●
This function is not available in the following cases:
• Preview Mode
• When the lighting is low
182
→
→ [Custom] →
Using Menu Functions
[Custom] → [Exposure]
(→101)
[Focus / Release Shutter]
Menu list