[Sequence Composition] - Panasonic LUMIX DC-TZ200 Operating Instructions Manual

Table of Contents

Advertisement

[Sequence Composition]

Select multiple frames from a 4K burst file to create a sequence composition of a moving
subject into one picture.
[Playback] → [Sequence Composition]
1
Use
to select the 4K burst files and press [MENU/SET]
2
Select frames to combine
Select the frames so that the moving subject will not overlap on the preceding or
subsequent frames. (The sequence composition may not be created properly if the
subject overlaps.)
Drag the slide bar or use
Press [MENU/SET]
• The selected frames are remembered, and the display goes to
the preview screen.
• Use
the following operations.
– [Next]: Lets you select more frames for combining.
– [Reselect]: Discards the frame selected immediately before
Repeat steps
Press
to select [Save], and then press [MENU/SET]
3
Select [Yes] at the confirmation screen and press [MENU/SET]
• Pictures are saved in JPEG format. Recording information (Exif information) of the first frame
such as shutter speed, aperture, and ISO sensitivity are also registered.
Tips for [Sequence Composition]
We recommend using a tripod to take pictures for [Sequence Composition].
215
to select items and press [MENU/SET] to perform
and lets you select a different image.
-
to select more frames to combine (from 3 to 40 frames)
to select the frames to combine
Using Menu Functions
Menu list

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lumix dc-tz202

Table of Contents