Setting The Iso Sensitivity; Iso Sensitivity - Panasonic LUMIX DC-TZ200 Operating Instructions Manual

Setting the ISO Sensitivity

Recording mode:
Set ISO sensitivity (sensitivity to lighting).
→ [Rec] → [Sensitivity]
1
Select the ISO sensitivity by rotating the
rear dial

ISO sensitivity

AUTO
(Intelligent ISO)
*
[L.80] 2 / [L.100]
from [125] to
[12800] / [H.25600]
*
1
When [ISO Auto Upper Limit (Photo)] is set to [AUTO].
*
2
Only when [Extended ISO] is [ON].
2
Press [MENU/SET] to set
• You can also press the shutter button halfway to set.
101
Focus, Brightness (Exposure) and Colour tone Settings
ISO sensitivity is automatically set in a range up to 3200 (with the
*
flash on: 4000)
ISO sensitivity is automatically set in a range up to 3200 (with the
*
flash on: 4000)
subject.
• The shutter speed is not fixed when the shutter button is pressed
halfway. It is continuously changing to match the movement of the
subject until the shutter button is pressed fully.
*
2 /
ISO sensitivity is fixed at the selected setting.
*
2
1 depending on the brightness of a subject.
1 depending on the movement and brightness of a
1 2
25 0