[Monochrome Live View]
You can display the recording screen in black and white. This function is useful when a
black and white screen will make it easier to adjust focus in Manual Focus mode.
When using the HDMI output during recording, the image is not displayed in black and white.
This does not affect recorded pictures.
You can check the effects of the chosen aperture and shutter speed on the recording
screen in Manual Exposure Mode.
This function is disabled when the flash is used.
When you perform Manual Focus operation, this function automatically adds colour to the
portions of the image that are in Focus (portions on the screen with clear outlines).
When [Detect Level] in [SET] is set to [HIGH], portions to be highlighted are reduced, allowing you
to achieve a more precise focus.
Changing the [Detect Level] setting also changes the [Display Color] setting as follows.
Each time [
[LOW]) → [
This function is not available in the following case:
• [Rough Monochrome] (Creative Control Mode)
] (Light blue)
] (Yellow Green)
] in [
] is touched, the setting is switched in order of [
] ([Detect Level]: [HIGH]) → [OFF].
Using Menu Functions
[Monitor / Display]
] ([Detect Level]: