To set daylight savings
• When daylight savings [
cancelled, the time automatically returns to the current time.
When you come back from your travel destination
Select [Home] in step
If you cannot find your destination in the area displayed on the screen, set based on difference
with home time.
If you set your travel schedule and record pictures, the day of your trip on which the
picture was taken will be recorded.
To record [Location]
Once the [Travel Setup] is set, you can set the location.
• For details on how to enter characters, refer to "Entering Text"
To print [Location] or the number of days that have passed, either use [Text Stamp]
print using the "PHOTOfunSTUDIO" software.
The travel date is calculated from the set departure date and the date set in the camera's clock.
When destination is set in [World Time], days elapsed are calculated based on local destination
When [Travel Setup] is set to [OFF], the number of days elapsed is not recorded. It is not
displayed even if [Travel Setup] is set to [SET] after recording.
When the current date passes the return date, [Travel Setup] is automatically cancelled.
[Travel Date] cannot be recorded for AVCHD motion pictures.
[Location] cannot be recorded while recording motion pictures, recording 4K photos, or recording
in [Post Focus].
. (Press again to release the setting)
] is set, the current time is advanced by 1 hour. If the setting is
and press [MENU/SET].
Using Menu Functions