Download  Print this page

About Wi-fi Connections; Connecting Via A Wireless Access Point ([via Network]) - Panasonic LUMIX DC-TZ200 Operating Instructions Manual

Hide thumbs

Advertisement

About Wi-Fi connections

The following types of connections are available.
[Setup] → [Wi-Fi] → [Wi-Fi Function]
[New Connection]
[Select a destination
from History] /
[Select a destination
from Favorite]

Connecting via a wireless access point ([Via Network])

Select a connection method to the wireless access point.
[WPS (Push-Button)]
[WPS (PIN code)]
[From List]
261
A connection is made by selecting a Wi-Fi function and the connected
device. When the following screen is displayed, select either [Via
Network]
(→261)
or [Direct]
Connection is made using the same settings as the previous time.
(→265)
Save push button type wireless access point that is compatible with
Wi-Fi Protected Setup™ with a WPS mark.
1
Press the wireless access point WPS button until it
switches to WPS Mode
Save PIN code type wireless access point that is compatible with
Wi-Fi Protected Setup with a WPS mark.
1
On the camera screen, select the wireless access point
you are connecting to
2
Enter the PIN code displayed on the camera screen
into the wireless access point
3
Press [MENU/SET] on the camera
Select this option when you are not sure about the WPS compatibility,
or when you want to search for and connect to a wireless access
point.
(→262)
(→264)
and make a connection.
Wireless access point
Wi-Fi/Bluetooth

Advertisement

Table of Contents

This manual is also suitable for:

Lumix dc-tz202Lumix dc-zs200

Comments to this Manuals

Symbols: 0
Latest comments: