Download  Print this page

Sending Pictures To Av Device; Sending Images To An Av Device - Panasonic LUMIX DC-TZ200 Operating Instructions Manual

Hide thumbs

Advertisement

Sending pictures to AV device

Still pictures and motion pictures can be sent to AV devices in the home (home AV
devices), such as DLNA compatible recorders.
[Setup] → [Wi-Fi] → [Wi-Fi Function] → [New Connection]
→ [Send Images While Recording] / [Send Images Stored in the Camera]
→ [AV device]
1
Select [Via Network] or [Direct] to connect
2
Select the device you wish to connect to
3
Check the send settings, and select [Set]
• To change the send setting, press the [DISP.] button.
[Send Images While Recording]
4
Take a still picture
[Send Images Stored in the Camera]
4
Select the picture
Sending may fail depending on the operational status of the AV device. Also, sending may take a
while.
When [Auto Transfer] in the [Bluetooth] is set to [ON], [Wi-Fi Function] is disabled.
251
Wireless access point
(→246)
(→247)
Home AV device
(→261, 264)
(→248)
Wi-Fi/Bluetooth

Advertisement

Table of Contents

This manual is also suitable for:

Lumix dc-tz202Lumix dc-zs200

Comments to this Manuals

Symbols: 0
Latest comments: