Setting The 2Nd Curtain Sync; Adjusting The Flash Output; 2Nd Curtain Synchro; [Flash Adjust.] - Panasonic LUMIX DC-TZ200 Operating Instructions Manual

Table of Contents

Advertisement

Setting the 2nd curtain sync

Recording mode:
2nd curtain sync is a recording method in which the flash fires just before the shutter
closes when you take a picture of a moving subject (such as a car) using the flash with a
slow shutter speed.
[Rec] → [Flash] → [Flash Synchro]
[1ST]
[2ND]
If you set to [2ND], [2nd] will be displayed in the flash icon on the screen.
When a fast shutter speed is set, the [Flash Synchro] effect may not be sufficiently achieved.
When [2ND] is set, you cannot set the flash setting to [

Adjusting the flash output

Recording mode:
Adjust the flash output if a picture taken using the flash is too bright or too dark.
[Rec] → [Flash] → [Flash Adjust.]
1
Press
to set the flash output and press [MENU/SET]
Settings: –2 EV to +2 EV (unit: 1/3 EV)
When you do not want to adjust the intensity of the flash, select [±0 EV].
When the intensity of the flash is adjusted, [+] or [-] is displayed on the flash icon.
146
1st curtain sync is the normal recording method when
using the flash.
The light source is captured in back of the subject and
this produces a picture that is vibrant and lively.
Stabiliser, Zoom and Flash
Taking pictures with flash
] or [
].

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lumix dc-tz202

Table of Contents