[Economy] - Panasonic LUMIX DC-TZ200 Operating Instructions Manual

Table of Contents

Advertisement

[Economy]

[Sleep Mode]
The camera is automatically turned off if the camera has not been used for the time
selected on the setting.
• When you want to use the camera again, either press the shutter button halfway or turn
the camera back on.
[Sleep Mode(Wi-Fi)]
The camera is automatically turned off if the camera has not been used for approx.
15 minutes with no Wi-Fi connection.
• When you want to use the camera again, either press the shutter button halfway or turn
the camera back on.
[Auto LVF/Monitor Off]
The monitor/viewfinder is automatically turned off if the camera has not been used for the
time selected on the setting.
• To turn the monitor/viewfinder on again, press any button.
This function is not available in the following cases:
• During motion picture recording/playback
• When recording with [
• When recording in [Multi Exp.]
• When connected to computer/printer
• During Slide Shows
• When using [Time Lapse Shot]
• When [Auto Shooting] of [Stop Motion Animation] is set to [ON]
• While the HDMI output is being used for recording.
When using the AC adaptor (optional) and DC coupler (optional), [Sleep Mode] or [Sleep
Mode(Wi-Fi)] is disabled.
198
] ([4K Pre-Burst]) of the 4K Photo function
Using Menu Functions
Menu list
[Setup]

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lumix dc-tz202

Table of Contents