Download  Print this page

Changing The Settings Assigned To The Control Ring/rear Dial - Panasonic LUMIX DC-TZ200 Operating Instructions Manual

Hide thumbs


Changing the settings assigned to the control ring/
rear dial
Recording mode:
Changes the settings assigned to the control ring/rear dial.
[Custom] →
Settings: [
] (control ring) / [
[DEFLT] [Normal]
[Step Zoom]
[Exposure Comp.]
[White Balance]
[AF Mode]
[Focus Mode]
[Drive Mode]
Items that can only be set to the control ring
• To return to the default setting, select [Normal].
• If you do not use the control ring, select [Not Set].
• Under [Highlight Shadow], use the control ring and rear dial.
If [Highlight Shadow] is assigned to the control ring (or rear dial), [Highlight
Shadow] will also be assigned to the rear dial (or control ring).
The assigned function setting applies to all the recording modes.
However, the assigned function may not operate when combined with certain recording mode.
[Operation] → [Ring/Dial Set]
] (rear dial)
to select the setting and press [MENU/SET]
[Photo Style]
[Filter Effect]
[Aspect Ratio]
[Highlight Shadow]
[Flash Mode]
[Flash Adjust.]
[OFF] [Not Set]


Table of Contents

This manual is also suitable for:

Lumix dc-tz202Lumix dc-zs200

Comments to this Manuals

Symbols: 0
Latest comments: