Panasonic LUMIX DC-TZ200 Operating Instructions Manual page 271

Table of Contents

Advertisement

Bars may appear at the sides or at the top and bottom of the screen, depending on the aspect
ratio setting.
Change the screen mode on your TV if the picture is displayed with the top or bottom cut off.
Depending on the TV to be connected, motion picture files or 4K burst files may not be played
back correctly.
Check the [HDMI Mode (Play)].
To play back 24p motion pictures, set [HDMI Mode] to [AUTO]. Otherwise, the picture is not output
at 24 frames per second.
Pictures are not displayed on the camera screen. Also, sound is not produced from the camera's
speaker.
HDMI output will be cancelled if a USB connection cable (supplied) is connected simultaneously.
Read the operating instructions for the TV.
The recorded pictures can be played back on a TV with an SD Memory Card
slot
Proper playback (aspect ratio) will be dependent on the TV used for viewing.
The file format of the motion pictures that can be played back differs depending on the TV model.
You may not be able to play back panorama pictures. Also you cannot perform automatic scrolling
playback of panorama pictures.
For cards compatible with playback, refer to the operating instructions of the TV.
271
(→201)
Connecting with other devices
Viewing on TV screen

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lumix dc-tz202

Table of Contents