Inserting the battery
To charge the battery, insert it into the camera.
Slide the release lever to the [OPEN]
position and open the card/battery door
Insert the battery all the way
• Insert the battery all the way firmly and check
that it is locked by lever.
Close the card/battery door and then
slide the release lever to the [LOCK]
Make sure to insert the battery in the correct
To remove battery
Move the lever in the card/battery
compartment in the direction of the arrow.
Always use genuine Panasonic batteries.
If you use other batteries, we cannot guarantee the quality of this product.
To remove the battery, turn the camera off and wait until the LUMIX indicator on the screen goes
off. (Failure to wait may cause the camera to malfunction and may damage the card or recorded
Remove battery from camera after use.