Taking Pictures With Exposure Compensation; Exposure Compensation - Panasonic LUMIX DC-TZ200 Operating Instructions Manual

Table of Contents

Advertisement

Taking pictures with Exposure Compensation

Recording mode:
Corrects the exposure when there is a backlight or when the subject is too dark or too
bright.
1
Press [
2
Rotate the rear dial to compensate the
exposure
Exposure Bracket

Exposure Compensation

• Press
Under-exposed
3
Press [MENU/SET] to set
• You can also press the shutter button halfway to set.
In Manual Exposure Mode, you can correct the exposure only when the ISO sensitivity is
set to [AUTO].
(You can select Exposure Compensation when the Quick menu is displayed by pressing
the [Q.MENU/
You can set the exposure compensation value in the range between –5 EV and +5 EV.
Settings can be made within a range of –3 EV to +3 EV while recording motion pictures, recording
4K photos, or recording in [Post Focus].
Depending on the brightness, this may not be possible in some cases.
When the Exposure Compensation value is out of the –3 EV to +3 EV range, the brightness of
the recording screen will no longer change. It is recommended to record by checking the actual
brightness of the recorded image in the Auto Review or playback screen.
The set Exposure Compensation value is stored even if the camera is turned off. (When [Exposure
Comp. Reset] is set to [OFF])
100
Focus, Brightness (Exposure) and Colour tone Settings
] button (
)
to set the Exposure Bracket.
Adjust the
exposure to the [+]
direction
] button.)
(→128)
Optimum
exposure
Adjust the
exposure to the [-]
direction
OFF
Over-exposed

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lumix dc-tz202

Table of Contents