Download  Print this page

Panasonic LUMIX DC-TZ200 Operating Instructions Manual Page 114

Hide thumbs

Advertisement

Auto Marking function
The camera automatically sets markers on scenes in which a face or the movement of a subject is
detected.
(Example: At the scene when a vehicle passes by, a balloon bursts, or a person turns around)
• Up to 10 markers are displayed for each file.
• In the following cases, markers may not be set by the Auto Marking function depending on the
recording conditions and the status of subjects.
– The camera is moving because of panning or jitter
– The movement of a subject is slow/small, or the subject is small
– A face is not facing front
Switches a marker to be displayed
Touch [
] on the slide view screen, 4K burst playback screen, or marker operation
screen.
[Auto]
[Face Priority]
[Motion Priority]
[Off]
You cannot delete markers set by the Auto Marking function.
The markers set by the Auto Marking function may not be displayed correctly if you split the 4K
burst file on a device other than this camera and then play it back on the camera.
In the following cases, markers set by the Auto Marking function are not displayed.
• 4K burst files recorded with [4K Pre-Burst]
114
Recording with the 4K Photo function and selecting pictures to save
Displays a marker on a scene in which a face or the movement of a subject is
detected.
Displays a marker with preference given to a scene in which a face is detected.
Displays a marker with preference given to a scene in which the movement of a
subject is detected.
Displays manually set markers only.
4K Photo and Drive Settings

Advertisement

Table of Contents

This manual is also suitable for:

Lumix dc-tz202Lumix dc-zs200

Comments to this Manuals

Symbols: 0
Latest comments: