When [Video Record] is assigned to the function button, you can start and stop recording motion
pictures in the same way as pressing the motion picture button.
When [Focus Area Set] is assigned to the function button, you can display the AF area or the MF
Assist position setting screen.
When [Operation Lock] is assigned to the function button, you can disable the operations that
were set using [Operation Lock Setting] in the [Custom] ([Operation]) menu. To cancel the lock,
press the function button to which [Operation Lock] is assigned again.
When [Rec / Playback Switch] is assigned to the function button, you can switch between
recording mode and playback mode.
To restore the default function button settings, select [Restore to Default] in
If the screen displays
performed instead of the function assigned to function buttons by
[Fn Button Set].
Using the function buttons during playback
You can directly set an assigned function to a selected image by pressing the function
button during playback.
Example: When [Fn2] is set to [Rating★3]
to select the picture
Press [Fn2] button, and then set the picture as
Functions that can be assigned in [Setting in PLAY mode]
• The following functions can be assigned to the button [Fn1], [Fn2] or [Fn4].
• [Wi-Fi]: [Fn1]
• [LVF/Monitor Switch]: [Fn4]
• [Rec / Playback Switch]
• [4K PHOTO Play]
• [Delete Single]
Function button settings at the time of purchase.
No function is assigned to function buttons.
To restore the default function button settings, select [Restore to Default] in step
Assigning frequently used functions to the buttons (Function buttons)
or similar, the displayed operation will be
• [Rating★3]: [Fn2]
• [RAW Processing]
• [4K PHOTO Bulk Saving]