Download  Print this page

Panasonic LUMIX DC-TZ200 Operating Instructions Manual Page 104

Hide thumbs

Advertisement

3
Press [MENU/SET] to set
• You can also press the shutter button halfway to set.
Under fluorescent lighting, LED lighting fixtures, etc., the optimal White Balance will vary
depending on the lighting type, so use [AWB], [AWBc], [
The White Balance may not operate correctly if you take pictures using a flash and the subject is
recorded outside of the effective flash range.
In Scene Guide Mode, settings suitable for each scene are made.
In Scene Guide Mode, changing the scene or recording mode will return White Balance settings
(including the White Balance fine adjustment setting) back to [AWB].
Auto White Balance
When [AWB] (Automatic White Balance) is set, the colouring is adjusted in accordance
with the light source. However, if the scene is too bright or too dark or if other extreme
conditions apply, the pictures may appear reddish or bluish. The White Balance may not
operate correctly if there is a multiple number of light sources. In that case, set the [White
Balance] to settings other than [AWB] or [AWBc] to adjust the colouring.
: [AWB] operational range
10000K
Blue sky
9000K
8000K
Cloudy sky (rain)
7000K
Shade
6000K
Sunlight
5000K
White fluorescent lighting
4000K
3000K
Incandescent lighting
2000K
Sunset/sunrise
Candlelight
K=Kelvin Colour Temperature
104
Focus, Brightness (Exposure) and Colour tone Settings
Adjusting the White Balance
], [
], [
] or [
].

Advertisement

Table of Contents

This manual is also suitable for:

Lumix dc-tz202Lumix dc-zs200

Comments to this Manuals

Symbols: 0
Latest comments: