Adjusting The Picture Quality - Panasonic LUMIX DC-TZ200 Operating Instructions Manual

●
In Intelligent Auto Plus Mode, the setting will be reset to [Standard] when the camera is switched
to another Recording mode or this unit is turned on and off.
●
Only picture quality adjustment can be set in the Scene Guide Mode.
■

Adjusting the picture quality

• Picture quality cannot be adjusted in the Intelligent Auto
Plus Mode.
Press to select the type of Photo Style
Press to select an item and press
[Contrast]
[Sharpness]
[Noise Reduction]
[Saturation]
[Color Tone]
[Filter Effect]
*
1
[Color Tone] is displayed only when [Monochrome] or [L.Monochrome] is selected. Otherwise,
[Saturation] is displayed.
*
2
Displayed only when [Monochrome] or [L.Monochrome] is selected.
• When the picture quality is adjusted, [+] will be displayed in the [Photo Style] icon.
Press [MENU/SET]
■
Registering the setting for the adjusted picture quality to [Custom]
Perform the picture quality adjustment in Step
press the [DISP.] button
168
[+] Increases the contrast in a picture.
[–] Decreases the contrast in a picture.
[+] Enhances the outlines in a picture.
[–] Softens the outlines in a picture.
Increases the noise reduction effect to reduce noise. This
[+]
setting may slightly lower the resolution.
Lowers the noise reduction effect to achieve a picture
[–]
quality with clearer resolution.
[+] Gaudy colouring
*
1
[–] Subdued colouring
[+] Bluish colouring
*
1
[–] Yellowish colouring
Enhances the contrast of a subject. (Effect: Low)
[Yellow]
Records a blue sky clearly.
Enhances the contrast of a subject. (Effect: Medium)
[Orange]
Records a blue sky with vibrant colours.
*
2 Enhances the contrast of a subject. (Effect: High)
[Red]
Records a blue sky with even more vibrant colours.
Applies subdued colouring for the skin and lips of a person.
[Green]
Emphasises green leaves and makes them brighter.
[Off]
(→168)
to adjust
—
of "Adjusting the picture quality" and
Using Menu Functions
Menu list
Standard