Download  Print this page

Aperture Bracket; Focus Bracket - Panasonic LUMIX DC-TZ200 Operating Instructions Manual

Hide thumbs

Advertisement

Taking Pictures While Adjusting a Setting Automatically (Bracket Recording)

Aperture Bracket

Recording mode:
About [More Settings] (step
[Image Count]
• When using burst recording, if you press and hold the shutter button, recording will be
performed until a specified number of pictures are taken.
Example:
3.3 4
5.6
When the initial position is set to F4:
first picture,

Focus Bracket

About [More Settings] (step
[Step]
*
[Image Count]
[Sequence]
*
Not available for burst recording. When using burst recording, if you press and hold the shutter
button, recording will be performed continuously until a specified number of pictures are taken.
[Sequence]: Example when [0/–/+] is selected
Close-up
Infinity
first picture,
Pictures taken with Focus Bracket are displayed as a set of group pictures.
129
2
in (→127))
[3]: Takes a specified number of pictures with different aperture values
within the range based on the initial aperture value.
[ALL]: Takes pictures using all aperture values.
8
second picture,
third picture,
2
in (→127))
Sets the interval between focus positions.
Sets the number of pictures to be taken.
[0/–/+]: Takes pictures with different focus positions within the range
based on the initial focus position.
[0/+]: Takes pictures with different focus positions toward the far side
based on the initial focus position.
second picture...
fourth picture
[Sequence]: Example when [0/+] is selected
fifth picture...
4K Photo and Drive Settings

Advertisement

Table of Contents

This manual is also suitable for:

Lumix dc-tz202Lumix dc-zs200

Comments to this Manuals

Symbols: 0
Latest comments: