Panasonic LUMIX DC-TZ200 Operating Instructions Manual page 263

Table of Contents

Advertisement

When connecting with [Manual Input]
• When connecting by [Manual Input], confirm SSID, network authentication type,
encryption type, encryption key of the wireless access point you are using.
On the screen of step
by [From List])", select [Manual Input]
Enter the SSID of the wireless access point you are connecting to, then select [Set]
• For details on how to enter characters, refer to "Entering Text"
Select the network authentication type
[WPA2-PSK]
[WPA2/WPA-PSK]
[No Encryption]
(When an option other than [No Encryption] is selected)
Enter the encryption key
Check the wireless access points instruction manual and settings when saving a wireless access
point.
If no connection can be established, the wireless access point's radio waves may be too weak.
Refer to "Message displays"
Transmission speed may decrease, or may not be usable depending on the environment it is used
in.
263
1
of "If you are not sure about the WPS compatibility (connecting
Supported encryption methods: [TKIP] / [AES]
(→291)
and "Q&A Troubleshooting"
Wi-Fi/Bluetooth
About Wi-Fi connections
(→51)
(→297)
for details.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lumix dc-tz202

Table of Contents