Changing The Settings Assigned To The Control Ring/Rear Dial - Panasonic Lumix DC-TZ200D Operating Instructions Manual

Changing the settings assigned to the control ring/
rear dial
Recording mode:
Changes the settings assigned to the control ring/rear dial.
→ [Custom] →
Settings: [ ] (control ring) / [
1
Use
[DEFLT] [Normal]
[Zoom]
[Step Zoom]
[Exposure Comp.]
[Sensitivity]
[White Balance]
[AF Mode]
[Focus Mode]
[Drive Mode]
*
Items that can only be set to the control ring
• To return to the default setting, select [Normal].
• If you do not use the control ring, select [Not Set].
• Under [Highlight Shadow], use the control ring and rear dial.
If [Highlight Shadow] is assigned to the control ring (or rear dial), [Highlight
Shadow] will also be assigned to the rear dial (or control ring).
●
The assigned function setting applies to all the recording modes.
However, the assigned function may not operate when combined with certain recording mode.
50
[Operation] → [Ring/Dial Set]
] (rear dial)
to select the setting and press [MENU/SET]
*
*
[Photo Style]
[Filter Effect]
[Aspect Ratio]
[Highlight Shadow]
[i.Dynamic]
[i.Resolution]
[Flash Mode]
[Flash Adjust.]
*
[OFF] [Not Set]
Basics