Table of Contents
Advertisement
About Wi-Fi connections
The following types of connections are available.
→
[Setup] → [Wi-Fi] → [Wi-Fi Function]
[New Connection]
[Select a destination
from History] /
[Select a destination
from Favorite]
Connecting via a wireless access point ([Via Network])
Select a connection method to the wireless access point.
[WPS (Push-Button)]
[WPS (PIN code)]
[From List]
261
A connection is made by selecting a Wi-Fi function and the connected
device. When the following screen is displayed, select either [Via
Network]
(→261)
or [Direct]
Connection is made using the same settings as the previous time.
(→265)
Save push button type wireless access point that is compatible with
Wi-Fi Protected Setup™ with a WPS mark.
1
Press the wireless access point WPS button until it
switches to WPS Mode
Save PIN code type wireless access point that is compatible with
Wi-Fi Protected Setup with a WPS mark.
1
On the camera screen, select the wireless access point
you are connecting to
2
Enter the PIN code displayed on the camera screen
into the wireless access point
3
Press [MENU/SET] on the camera
Select this option when you are not sure about the WPS compatibility,
or when you want to search for and connect to a wireless access
point.
(→262)
(→264)
and make a connection.
Wireless access point
Wi-Fi/Bluetooth
Advertisement
Table of Contents
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated