Setting The Iso Sensitivity - Panasonic LUMIX DC-TZ95D Operating Instructions For Advanced Features

Setting the ISO Sensitivity

Recording mode:
Set ISO sensitivity (sensitivity to lighting).
→ [Rec] /
1
Select the ISO sensitivity by rotating the
control dial
ISO sensitivity
AUTO
(Intelligent ISO)
From 80 to 3200,
*
H.6400 2
*
1
When [ISO Auto Upper Limit (Photo)] in the [Rec] menu is set to [AUTO].
*
2
Only when [Extended ISO] in the [Custom] ([Exposure]) menu is [ON].
2
Press [MENU/SET] to set
• You can also press the shutter button halfway to set.
110
Focus, Brightness (Exposure) and Colour tone Settings
[Motion Picture] → [Sensitivity]
ISO sensitivity is automatically set in a range up to 3200 (with the
*
flash on: 1600) 1 depending on the brightness of a subject.
ISO sensitivity is automatically set in a range up to 3200 (with the
*
flash on: 1600) 1 depending on the movement and brightness of a
subject.
• The shutter speed is not fixed when the shutter button is pressed
halfway. It is continuously changing to match the movement of the
subject until the shutter button is pressed fully.
ISO sensitivity is fixed at the selected setting.
8 1
0 0