Allen-Bradley 2094-AC05-MP5 User Manual page 55

Kinetix 6000 IAM, AM, IPIM, Shunt,
or Slot-filler Module, Rear View
(IAM module is shown)
Power Rail
Rockwell Automation Publication 2094-UM001J-EN-P - March 2017
4. Pivot module downward and align the guide pins on the power rail with
the guide pin holes in the back of the module.
Pivot module downward
and align with guide pins.
Guide Pin
Holes
Power rail (side view)
in upright vertical position.
TIP The IAM module can have two or three power rail connectors and guide
pins, the AM module can have one or two, all other modules have one.
5. Gently push the module against the power rail connectors and into the
final mounting position.
Bracket secured in slot.
Mount the Kinetix 6000 Drive System
Guide Pins
Kinetix 6000 IAM, AM, IPIM, Shunt,
or Slot-filler Module, Side View
(IAM module is shown)
Kinetix 6000 IAM, AM, IPIM,
Shunt, or Slot-filler Module
(IAM module is shown)
Chapter 3
55