Installation Instructions Bulletin 2097 AC Line Filters Catalog Numbers 2097-F1, 2097-F2, 2097-F4, 2097-F5, 2097-F6 Topic Page About the AC Line Filters Important User Information Before You Begin Install the AC Line Filter (side-mount) Install the AC Line Filter (rear-mount) Bulletin 2097 AC Line Filter Specifications Additional Resources About the AC Line Filters This publication provides installation instructions for the Bulletin 2097 AC Line Filters.
2 Bulletin 2097 AC Line Filters Important User Information Solid state equipment has operational characteristics differing from those of electromechanical equipment. Safety Guidelines for the Application, Installation and Maintenance of Solid State Controls (Publication SGI-1.1 available from your local Rockwell Automation® sales office or online at http://www.rockwellautomation.com/literature/) describes some important differences between solid state equipment and hard-wired electromechanical devices.
Bulletin 2097 AC Line Filters 3 Before You Begin For general guidelines when laying out your panel and mounting your AC line filter, refer to the System Design for Control of Electrical Noise Reference Manual, publication GMC-RM001. For guidelines specific to your application, refer to Additional Resources page 8 for the user manual.
4 Bulletin 2097 AC Line Filters Install the AC Line Filter (side-mount) The following steps apply to the installation of AC line filter, catalog numbers 2097-F1 and 2097-F2. 1. Use Figure 2 on page to determine the space required on the right side of your drive to install your side-mount AC line filter.
Bulletin 2097 AC Line Filters 5 Install the AC Line Filter (rear-mount) The following steps apply to the installation of your AC line filter, catalog numbers 2097-F4, 2097-F5, and 2097-F6. 1. Use Figure 3 on page to determine the cabinet space required to install your rear-mount AC line filter.
Page 6
6 Bulletin 2097 AC Line Filters Wire the AC Line Filter Connect the AC line filter as shown in these examples. Refer to the System Design for Control of Electrical Noise Reference Manual, publication GMC-RM001, for proper high-frequency (HF) bonding techniques to improve overall system performance. Replacement connector sets (catalog number 2097-CONN1) are available.
Page 7
Bulletin 2097 AC Line Filters 7 AC Line Filter Dimensions Mounting dimensions for side and rear-mount AC line filters. Figure 2 AC Line Filter (side-mount) Dimensions Catalog Numbers 2097-F1 and 2097-F2 Dimension are in mm (in.). 165.6 (6.52) 149.9 (5.90) 33 0 (1.30) 35.8...
Allen-Bradley® distributor or Rockwell Automation sales representative. Allen-Bradley, Kinetix, Rockwell Software, and Rockwell Automation are trademarks of Rockwell Automation, Inc. Trademarks not belonging to Rockwell Automation are property of their respective companies.