Viewing Sbc Registered Users - AudioCodes Mediant 800 User Manual

CHAPTER 58 Viewing VoIP Status
Counter
Average
Call
Duration
(ACD)
Attempted
Fax Calls
Counter
Successful
Fax Calls
Counter

Viewing SBC Registered Users

You can view SBC users that are registered with the device. For each user, the Address of Record
(AOR) and the corresponding contacts are shown. An AOR is a SIP or SIPS URI that points to a
domain with a location service that can map the URI to another URI (contact) where the user might
be available. A contact is a SIP URI that can be used to contact that specific instance of the user
agent for subsequent requests.
➢
To view registered SBC users:
■ Web: SBC Registered Users page (Monitor menu > Monitor tab > VoIP Status folder > SBC
Registered Users).
Parameter
Address
of Record
Contact
The average call duration (ACD) in seconds of established calls. The ACD
value is refreshed every 15 minutes and therefore, this value reflects the
average duration of all established calls made within a 15 minute period.
Indicates the number of attempted fax calls.
Indicates the number of successful fax calls.
Table 58-2: SBC Registered Users Table Description
Displays the AOR, for example, "1000@10.8.5.71" or "Sue".
Displays the contacts associated with the AOR, for example:
<sip:1000@10.8.5.71:5060>;expires=180; Active status:1
The information displayed can include the following:
■ The origin of the contact:
✔
"Userinfo": Contact is from the User Information table (see
SBC User Information Table through Web Interface
✔
Contact URI if the contact is not from the User Information table.
■ Registration status:
✔
No display: The contact has been successfully registered with the device
and calls can be routed to the user.
✔
"Not-Active": The device has recently received a REGISTER request
from the contact, but the contact has yet to be registered. The device
removes the contact from the database if no response is received within
10 seconds from the proxy/registrar server.
Mediant 800 Gateway & E-SBC | User's Manual
Description
Description
- 1014 -
Configuring
on page 499)