Dell PowerConnect J-EX4200-24T Software Manual page 1413

To enable VSTP on multiple VLANs using a VLAN group:
To enable VSTP on all VLANs:
To enable VSTP on a VLAN using a single VLAN ID:
To enable VSTP on a VLAN using a single VLAN name:
Related Understanding VSTP for J-EX Series Switches on page 1281
Documentation
[edit protocols]
user@switch# set vstp vlan-group group group-name vlan vlan-id-range
[edit protocols]
user@switch# set vstp vlan all
NOTE: RSTP must be enabled if the
to enable VSTP and the switch has more than 253 VLANs. If the
vlan all statement is used to enable VSTP on a switch with more than
253 VLANs, the configuration cannot be committed.
[edit protocols]
user@switch# set vstp vlan vlan-id
[edit protocols]
user@switch# set vstp vlan vlan-name
Chapter 66: Configuring Spanning-Tree Protocols
statement is used
set vstp vlan all
set vstp
1341