Leave-Timer (Mvrp) - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

leave-timer (MVRP)

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
1204
leave-timer milliseconds;
[edit protocols mvrp interface (all | interface-name)]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
For Multiple VLAN Registration Protocol (MVRP), configure the number of milliseconds
the switch retains a VLAN in the Leave state before the VLAN is unregistered. If the
interface receives a join message before this timer expires, the VLAN remains registered.
Maintain default timer settings unless there is a compelling reason to change the settings.
Modifying timers to inappropriate values might cause an imbalance in the operation of
MVRP.
1000 milliseconds
—Number of milliseconds that the switch retains a VLAN in the Leave state
milliseconds
before the VLAN is unregistered. At a minimum, set the leave-timer interval at twice
the join-timer interval.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
join-timer on page 1200
leaveall-timer on page 1206
Example: Configuring Automatic VLAN Administration Using MVRP on J-EX Series
Switches on page 1115
Configuring Multiple VLAN Registration Protocol (MVRP) (CLI Procedure) on page 1147