Rpf-Check - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

rpf-check

Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
980
rpf-check;
[edit interfaces interface-name unit logical-unit-number family inet],
[edit interfaces interface-name unit logical-unit-number family inet6]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
On J-EX4200 switches, enable a reverse-path forwarding (RPF) check on unicast traffic
(except ECMP packets) on all ingress interfaces.
On J-EX8200 switches, enable an RPF check on unicast traffic, including ECMP packets,
on the selected ingress interface.
Unicast RPF is disabled on all interfaces.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Example: Configuring Unicast RPF on a J-EX Series Switch on page 900
Configuring Unicast RPF (CLI Procedure) on page 927
Disabling Unicast RPF (CLI Procedure) on page 928
Understanding Unicast RPF for J-EX Series Switches on page 872