Merge (Cli Procedure) - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Assigning the Virtual Chassis ID to Determine Precedence During a Virtual Chassis

Merge (CLI Procedure)

Related
Documentation
Configuring Automatic Software Update on Virtual Chassis Member Switches (CLI
Procedure)
800
Understanding Split and Merge in a Virtual Chassis Configuration on page 712
Understanding Virtual Chassis Configuration on page 704
Every Virtual Chassis configuration has a unique ID that is automatically assigned when
the Virtual Chassis configuration is formed. You can also explicitly assign a Virtual Chassis
ID using the
set virtual-chassis id
attempt to merge, the Virtual Chassis ID that you assigned takes precedence over the
automatically assigned Virtual Chassis IDs and becomes the ID for the newly merged
Virtual Chassis configuration.
To configure the Virtual Chassis ID:
[edit]
user@switch# set virtual-chassis id id
Example: Assigning the Virtual Chassis ID to Determine Precedence During a Virtual
Chassis Merge on page 767
Configuring a Virtual Chassis (CLI Procedure) on page 781
Configuring a Virtual Chassis (J-Web Procedure) on page 784
Understanding Split and Merge in a Virtual Chassis Configuration on page 712
Understanding Virtual Chassis Configuration on page 704
The automatic software update feature allows you to automatically update the software
version on prospective member switches as they are added so that they can join a Virtual
Chassis configuration.
Before you begin, ensure that you know the name or the URL of the software package
to be used by the automatic software update feature.
To configure the automatic software update feature:
[edit]
user@switch# set virtual-chassis auto-sw-update package-name package-name
If the software package is located on a local directory on the switch, use the following
format for :
package-name
/pathname/package-name
If the software package is to be downloaded and installed from a remote location, use
one of the following formats:
ftp://hostname/pathname/package-name
command. When two Virtual Chassis configurations