Dell PowerConnect J-EX4200-24T Software Manual page 970

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Verification
Purpose
Action
Meaning
Purpose
898
unit 4 {
vlan-id 105;
family inet {
address 5.1.1.2/24;
}
}
}
To confirm that the configuration is working properly, perform these tasks:
Verifying That Subinterfaces Were Created on page 898
Verifying That Traffic Passes Between VLANs on page 898
Verifying That Subinterfaces Were Created
Verify that the subinterfaces were properly created on the access switch and distribution
switch.
Use the show interfaces
1.
user@access-switch> show interfaces ge-0/1/0 terse
Interface
ge-0/1/0
ge-0/1/0.0
ge-0/1/0.1
ge-0/1/0.2
ge-0/1/0.3
ge-0/1/0.4
ge-0/1/0.32767
Use the show interfaces command on the distribution switch:
2.
user@distribution-switch> show interfaces ge-0/0/0 terse
Interface
ge-0/0/0
ge-0/0/0.0
ge-0/0/0.1
ge-0/0/0.2
ge-0/0/0.3
ge-0/0/0.4
ge-0/0/0.32767
Each subinterface created is displayed as a
is the unit number in the configuration. The status is listed as
working.
Verifying That Traffic Passes Between VLANs
Verify that the distribution switch is correctly routing traffic from one VLAN to another.
command on the access switch:
Admin Link Proto
up up
up up inet
up up inet
up up inet
up up inet
up up inet
up up
Admin Link Proto
up up
up up inet
up up inet
up up inet
up up inet
up up inet
up up
ge-fpc/pic/port.x
Local Remote
1.1.1.1/24
2.1.1.1/24
3.1.1.1/24
4.1.1.1/24
5.1.1.1/24
Local Remote
1.1.1.2/24
2.1.1.2/24
3.1.1.2/24
4.1.1.2/24
5.1.1.2/24
logical interface, where
, indicating the link is
up
x