The Same Wiring Closet - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Table 107: Virtual Chassis Configuration Fields (continued)
Field Function
Disable If you want to reserve an individual member's
Management VLAN management Ethernet port for local troubleshooting,
you can remove that port from being part of the Virtual
Management Ethernet (VME).
Refresh Refreshes the operational status of Virtual Chassis
members.
Related
Documentation
Adding a New Switch to an Existing Virtual Chassis Configuration (CLI Procedure)
Adding a New Switch to an Existing Virtual Chassis Configuration Within the Same Wiring Closet
786
Configuring a Virtual Chassis (CLI Procedure) on page 781
Example: Configuring a Virtual Chassis with a Master and Backup in a Single Wiring
Closet on page 717
Example: Configuring a Virtual Chassis Interconnected Across Multiple Wiring Closets
on page 733
Monitoring Virtual Chassis Configuration Status and Statistics on page 809
Virtual Chassis Cabling Configuration Examples for J-EX4200 Switches
Virtual Chassis Overview on page 691
You can add one or more J-EX4200 switches to an existing Virtual Chassis configuration.
Up to ten J-EX4200 switches can be included within a Virtual Chassis configuration. You
can add the new switches to either type—nonprovisioned or preprovisioned—of Virtual
Chassis configuration. See "Configuring a Virtual Chassis (CLI Procedure)" on page 781
for descriptions of these types.
To add a switch to an existing Virtual Chassis configuration, use the procedure that
matches what you need to accomplish:
Adding a New Switch to an Existing Virtual Chassis Configuration Within the Same
Wiring Closet on page 786
Adding a New Switch from a Different Wiring Closet to an Existing Virtual Chassis
Configuration on page 787
Adding a New Switch to an Existing Preprovisioned Virtual Chassis Configuration Using
Autoprovisioning on page 789
Before you begin, be sure you have:
Mounted the new switch in a rack.
Confirmed that the new switch is powered off.
Your Action
Click to disable management VLAN on the
port.
Click to refresh the operational status.