Request Virtual-Chassis Vc-Port - Dell PowerConnect J-EX4200-24T Software Manual

request virtual-chassis vc-port

Syntax
Release Information
Description
Options
Additional Information
Required Privilege
Level
Related
Documentation
List of Sample Output
request virtual-chassis request virtual-chassis
vc-port set interface vc-port set interface
vcp-0 disable vcp-0 disable
request virtual-chassis
vc-port set interface
vcp-0 member 3
disable
request virtual-chassis vc-port set interface vcp-interface-name
<member member-id> <disable>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Disable or enable a Virtual Chassis port (VCP) for a dedicated VCP on the rear panel of
the Virtual Chassis.
interface vcp-interface-name
or .
vcp-0 vcp-1
member member-id —(Optional) Enable or disable the specified VCP on the specified
member of the Virtual Chassis configuration.
disable —(Optional) Disable the specified VCP. If you omit this keyword, the command
enables the dedicated VCP.
If you omit member member-id
dedicated VCP on the switch where the command is issued. The dedicated VCPs are
enabled in the factory default configuration.
system-control
request virtual-chassis vc-port on page 840
show virtual-chassis vc-port on page 851
show virtual-chassis vc-port statistics on page 854
clear virtual-chassis vc-port statistics on page 836
Understanding Virtual Chassis Components on page 694
request virtual-chassis vc-port set interface vcp-0 disable on page 841
request virtual-chassis vc-port set interface vcp-0 member 3 disable on page 841
user@host> request virtual-chassis vc-port set interface vcp-0 disable
To check the results of this command, use the show virtual-chassis vc-port command.
user@host> request virtual-chassis vc-port set interface vcp-0 member 3 disable
To check the results of this command, use the show virtual-chassis vc-port command.
Chapter 49: Operational Mode Commands for Virtual Chassis
—Name of the interface to enable or disable. Specify either
, this command defaults to disabling or enabling the
841