Show Virtual-Chassis Fast-Failover - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

show virtual-chassis fast-failover

Syntax
Release Information
Description
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Table 112: show virtual-chassis fast-failover Output Fields
Field Name Field Description
Indicates fast failover status on dedicated VCPs.
Fast failover on
dedicated VCP
ports
Indicates fast failover status on XFP uplink module VCPs. (Not supported
Fast failover on XE
on Dell PowerConnect J-EX Series Switches.)
uplink VCP ports
Fast failover on GE Indicates fast failover status on SFP uplink module VCPs.
uplink VCP ports
show virtual-chassis show virtual-chassis
fast-failover fast-failover
846
show virtual-chassis fast-failover
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Display information about the fast failover feature in a Virtual Chassis configuration.
view
Example: Configuring Fast Failover on Uplink Module VCPs to Reroute Traffic When a
Virtual Chassis Member Switch or Inter-Member Link Fails on page 763
Configuring Fast Failover in a Virtual Chassis Configuration on page 798
Disabling Fast Failover in a Virtual Chassis Configuration on page 799
Understanding Fast Failover in a Virtual Chassis Configuration on page 706
show virtual-chassis fast-failover on page 846
Table 112 on page 846 lists the output fields for the
command. Output fields are listed in the approximate order in which they appear.
user@switch1> show virtual-chassis fast-failover
Fast failover on dedicated VCP ports: Enabled
Fast failover on XE uplink VCP ports: Disabled
Fast failover on GE uplink VCP ports: Enabled
show virtual-chassis fast-failover