Dell PowerConnect J-EX4200-24T Software Manual page 1089

Table 138: show interfaces queue Output Fields (continued)
Field Name
Enabled
Interface index
SNMP ifIndex
Description
Forwarding classes
Ingress Queues Information (not shown for all interfaces)
Ingress queues
Transmitted
PFE chassis queues
Egress Queues Information
Egress queues
Queue
Queued
Chapter 56: Operational Mode Commands for Interfaces
Field Description
State of the interface. Possible values are:
Administratively down, Physical link is Down
the physical link is inoperable.
Administratively down, Physical link is Up
physical link is operational and can pass packets when it is enabled.
Enabled, Physical link is Down
link is inoperable and cannot pass packets.
—The interface is turned on, and the physical link
Enabled, Physical link is Up
is operational and can pass packets.
Index number of the physical interface, which reflects its initialization sequence.
SNMP index number for the physical interface.
User-configured interface description.
Number of forwarding classes supported and in use for the interface.
Number of input queues supported and in use on the specified interface.
Transmission statistics for the queue:
—Number of packets transmitted by this queue.
Packets
Bytes —Number of bytes transmitted by this queue.
—Number of packets dropped because the queue
Tail-dropped packets
buffers were full.
For an interface on an oversubscribed line card, the number of Packet
Forwarding Engine chassis queues supported and in use for the port group to
which the interface belongs. The Packet Forwarding Engine chassis queue for
a port group handles high priority traffic from all the interfaces in the port group.
Number of output queues supported and in use on the specified interface.
CoS queue number.
This counter is not supported on J-EX Series switches.
—The interface is turned off, and
—The interface is turned off, but the
—The interface is turned on, but the physical
1017