Member-Range - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

member-range

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
minimum-links
Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
974
member-range starting-interface-name to ending-interface-name;
[edit interfaces interface-range interface-range-name]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Specify the names of the first and last members of a sequence of interfaces belonging
to an interface range.
Range: Starting interface-name to ending interface-name—The name of the first member
and the name of the last member in the interface sequence.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring Gigabit Ethernet Interfaces (CLI Procedure) on page 919
Understanding Interface Ranges on J-EX Series Switches on page 869
J-EX Series Switches Interfaces Overview on page 863
Junos OS Network Interfaces Configuration Guide at
http://www.juniper.net/techpubs/software/junos/
minimum-links number;
[edit interfaces aex aggregated-ether-options]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
For an aggregated Ethernet interface, set the minimum number of links that must be up
for the bundle to be labeled up.
number —Number of links.
Range: 1 through 8 for J-EX Series switches other than J-EX8200 switches
1 through 12 for J-EX8200 switches
Default: 1
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Example: Configuring Aggregated Ethernet High-Speed Uplinks Between a Virtual
Chassis Access Switch and a Virtual Chassis Distribution Switch on page 740
Configuring Aggregated Ethernet Interfaces (CLI Procedure) on page 922