Bridge-Priority - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

bridge-priority

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
1182
bridge-priority priority;
[edit protocols mstp],
[edit protocols mstp msti msti-id],
[edit protocols rstp],
[edit protocols stp],
[edit protocols vstp vlan vlan-id]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Configure the bridge priority. The bridge priority determines which bridge is elected as
the root bridge. If two bridges have the same path cost to the root bridge, the bridge
priority determines which bridge becomes the designated bridge for a LAN segment.
32,768
priority —Bridge priority. It can be set only in increments of 4096.
Range: 0 through 61,440
Default: 32,768
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
show spanning-tree bridge on page 1398
show spanning-tree interface on page 1407
Example: Configuring Network Regions for VLANs with MSTP on J-EX Series Switches
on page 1297
Understanding MSTP for J-EX Series Switches on page 1277
Understanding VSTP for J-EX Series Switches on page 1281