Dell PowerConnect J-EX4200-24T Software Manual page 1203

user@switchA> show ethernet-switching layer2-protocol-tunneling interface
Layer2 Protocol Tunneling information:
Interface
ge-0/0/0.0
ge-0/0/1.0
ge-0/0/2.0
Meaning The show vlans extensive customer-1
have been enabled. The
command shows that L2PT is tunneling the STP protocol on VLAN
threshold is set to
ethernet-switching layer2-protocol-tunneling interface
operation being performed on each interface, the state of each interface and, if the state
is
Shutdown
Related Configuring Layer 2 Protocol Tunneling on J-EX Series Switches (CLI Procedure) on
Documentation page 1150
Understanding Layer 2 Protocol Tunneling on J-EX Series Switches on page 1056
Operation State
Encapsulation Shutdown
Decapsulation Shutdown
Decapsulation Active
command shows that Q-in-Q tunneling and L2PT
show ethernet-switching layer2-protocol-tunneling vlan customer-1
, and the shutdown threshold is set to
50
, the reason why the interface is shut down.
Chapter 58: Examples: Bridging and VLAN Configuration
Description
Shutdown threshold exceeded
Loop detected
. The
100
command shows the type of
, the drop
customer-1
show
1131