Link-Mode - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

link-mode

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
970
link-mode mode;
[edit interfaces interface-name ether-options]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Set the device's link-connection characteristic.
The mode is enabled.
automatic
—Link characteristic:
mode
—Connection is full duplex.
full-duplex
—Connection is half duplex.
half-duplex
automatic —Link mode is negotiated.
If no-auto-negotiation is specified in ether-options, you can select only
. If auto-negotiation is specified in
half-duplex
mode.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring Gigabit Ethernet Interfaces (CLI Procedure) on page 919
Configuring Gigabit Ethernet Interfaces (J-Web Procedure) on page 909
Junos OS Network Interfaces Configuration Guide at
http://www.juniper.net/techpubs/software/junos/
full-duplex
, you can select any
ether-options
or