Dell PowerConnect J-EX4200-24T Software Manual page 1137

Table 142: Components of the Basic Bridging Configuration Topology (continued)
Property
Connections to Avaya IP telephone—with integrated hub, to
connect phone and desktop PC to a single port (requires PoE)
Direct connections to desktop PCs (no PoE required)
Connections to file servers (no PoE required)
Connections to integrated printer/fax/copier machines (no PoE
required)
Unused ports (for future expansion)
Configuration
CLI Quick
Configuration
Step-by-Step
Procedure
Results
By default, after you perform the initial configuration on the J-EX4200 switch, switching
is enabled on all interfaces, a VLAN named
into this VLAN. You do not need to perform any other configuration on the switch to set
up bridging and VLANs. To use the switch, simply plug the Avaya IP phones into the
PoE-enabled ports ge-0/0/1
printers to the non-PoE ports,
.
ge-0/0/20
To configure bridging and VLANs:
Make sure the switch is powered on.
1.
Connect the wireless access point to switch port
2.
Connect the seven Avaya phones to switch ports
3.
Connect the five PCs to ports
4.
Connect the two file servers to ports
5.
Connect the two printers to ports
6.
Check the results of the configuration:
[edit]
user@switch> show configuration
## Last commit: 2008-03-06 00:11:22 UTC by triumph
version 9.0;
system {
root-authentication {
encrypted-password "$1$urmA7AFM$x5SaGEUOdSI3u1K/iITGh1"; ## SECRET-DATA
}
syslog {
user * {
any emergency;
Chapter 58: Examples: Bridging and VLAN Configuration
Settings
ge-0/0/1 through ge-0/0/7
through
ge-0/0/8 ge-0/0/12
and
ge-0/0/17 ge-0/0/18
through
ge-0/0/19 ge-0/0/20
through
ge-0/0/13 ge-0/0/16
ge-0/0/23
default is created, and all interfaces are placed
through ge-0/0/7 , and plug in the PCs, file servers, and
ge-0/0/8 through ge-0/0/12
ge-0/0/0
through
ge-0/0/8 ge-0/0/12
ge-0/0/17 and
ge-0/0/19 and ge-0/0/20
, and through
ge-0/0/21
and ge-0/0/17 through
.
through
ge-0/0/1 ge-0/0/7
.
ge-0/0/18 .
.
.
1065